Recent content by rikitheshadow

Would we still have another suggestion for this? I have another buyer who can't get the game to fully boot pass the loading screen. Same issue, different system board. They have the exact bios. 10 years.... dang

This TMNT board is still available. Fully functional.

Curious about the ATX reliability, cause some are built to a higher standard. Additionally you can have some minimal voltage dropout in the harness to the CPU boards so its possible level it out if it's over 5v by a small margin. My Virtual On twins, the satellite cabinet power supply died in it...

I captured video prior to me finishing everything.

Mostly finished outside of the marquee and light. I may consider re-printing some of the side panels since they did not come out as nearly perfect. The core material or black filament on the side panels are what I had leftover in this other type of PLA known as Lite PLA, which is a lighter...

Finally got some of the hardware i needed to re-print the control panel

I think i will work on the other issues I'm currently having with both cabinets before I work on this chassis

the working cabinet has a butchered harness for this computer power supply they installed, i wouldn't know if it causes voltage dropout issues for the midi sound board and force feedback controller board force feedback controller was working, then started slamming the wheel a few reboots later...

Opening a thread here about me fixing up these Sega Super GT twin setup. Really I purchased these with the thought of slotting one of those interface boards in replacement of the CPU board stack and use a computer to emulate all the Sega driving games I can. But i got a lot of cleanup, I gotta...

Bambu Lab A1 with AMS lite

As with my return thread in general I noted i was working on a 3D printed mini arcade cabinet powered by a raspberry pi. I did not design this one myself, but have made modifications. Original link https://makerworld.com/en/models/94544#profileId-102047 But here I'm just getting started...

Bunch of unknown condition 9200 Wells Gardner monitors, one standard resolution kortec i think. Everything was in disarray, they weren't the owner, they just worked there for 15 years. Not a single cabinet was complete except the Sega Super GT and even then the marquee was busted. Last time i...

Well at least the 2nd cabs monitor works. Just had a burned out fuse for the DC power supply so the monitor was just waiting for a signal. Tearing these cabinets down further will be fun...

I just recently acquired a sega super gt twin. The first monitor squeals at me, no picture, no neck glow. Absolutely nothing from the second monitor. And both game boards don't boot altho they have power. Besides cap kits and checking solder joints.... where do you think i should start for the...

I'm moving forward with the Sega Super GT setup, the full list was a listed in the original listing i started. Smoken Token cabinet Gauntlet legends cabinet NFL Blitz cabinet Few 25-29 inch arcade monitors, definitely one tri-sync i can see