Recent content by Ricky914

That is under load. I am not sure the ordering of the pcbs is correct in the cage as it’s not labeled, so a number of things could be wrong. I think with that knowledge I may try to do the retrofit kit rather than rebuilding possibly the suitcase, the linear board, and the auxiliary neg 5...

I am getting negative 8 volts rather than negative 5 volts. Does anyone know if this is traceable back to the suitcase power supply or the Aux -5v board? It’s for a 10 Pin Deluxe Shuffle Bowler, which as best I can tell uses the MCR set up, so I may just use a conversion kit, but I’d like to...

Here are some images of the pcb order. After testing under load the power at the harness is wonky to say the least, I’m getting nothing from 5volt under load and the negative voltage is 8. So hopefully it’s the configuration, but don’t see that sorting out the negative 8. Thanks

Awesome, thank you I’ll snap a photo. All the boards look cosmetically good, and the power voltage is correct, the 5 volt runs at 5.75 tested at the harness. That seems high, but I don’t know the draw under load so I left that. I’ll take a picture of the pcb ord, thank you for the reply!

So I bit the bullet and reentered the hobby after some time: I bought a “working” Bally Midway 10 pin deluxe bowler the other day. I can’t get anything from the unit, I tested the power to the board and everything seems to be getting juice. Although I believe the PCBs may be slotted...

I reciently aquired a large amount of arcade "junk". Well one of them is a massive mitsibishi arcade bid screen with stand, but.... Someone striped the stand and resurfaced it like it was going to be converted and all the wires and boards are gone. How do I hook this every day big screen up to...

Re: Super pac board and Qbert Qubes Board ultrarare really, I don't really know what I have. I was just told those two were rare, so I thought I should mention them.

I just put two really rare boards on ebay, (someone from cinci needs to get ahold of me before i list everything) a Qbert Qubes and a Super Pac Board, Super pac to ms pack wire adapter and a marquee for super pac, anyone from cinci!?

Hey a friend and I are selling mass arcade stuff. I just got back from school, so it starts now. on ebay i have a turbo, a street fighter, and a stun runner. I also have like so much more that i am not even going to attempt to go through it all now. I am going to make an inventory by this...

I\'m in Cinci Ohio Im moving and think it'll be easyer to sell thse then ship em, They are in cincinatti OH, Working nice- Sega Turbo, Outrun, street fighter alpha3 25' monitor, Double dragon, I then have two 19' dynamo cabs that can be set up as golden axe and altered beast, NOT WORKING-but in...

Im moving and think it'll be easyer to sell thse then ship em, They are in cincinatti OH, Working nice- Sega Turbo, Outrun, street fighter alpha3 25' monitor, Double dragon, I then have two 19' dynamo cabs that can be set up as golden axe and altered beast, NOT WORKING-but in the process of...

Im getting rid of some of my stuff before i go down south, here is the neo geo on ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=750184443

I need the control pannel for a sega turbo cockpit, or at least the opyical sensor for the steering wheel, it will only turn right, thanks

I'll reseat the chips, that the only thing i have'nt done, all the chips check out and everything passes in test mode, so im guessing they are all good

I've reconected just about every part, making sure its tight, It all checks out and runs fine in test menu, It just freezes in game mode imediately,saying"loading pixelation.." any help would be great, I haven't played it, but it seems everyone else loves it, so i want to play bad