Recent content by Renegatt

  1. Willy Wonka 2PL

    Great. Thank you very much for the information and help!
  2. Willy Wonka 2PL

    Both station problem. The same counter (M1 nad M4). Each station has meters connected to its controller (mech meter port). The cable from the controller to the meter contains five wires: three different grounds and two +12V wires (combined into three and powering the meters). I tested the meters...
  3. Willy Wonka 2PL

    Thank you! So you think it's a faulty controller? I was wondering why the problem occurred in both stations, with the same meter. I suspected the controller because the meters are connected directly to the motherboard.
  4. Willy Wonka 2PL

    Unfortunately, both. I replaced them with new ones, but there's no change. I measured the voltage going to M1 and M4, and it's 12V. There's no voltage on the others. During gameplay, the M2, M3, M5, and M6 counters don't change. I recently bought this machine and it arrived with this fault. At...
  5. Willy Wonka 2PL

    Hi, I'm having a problem with Willy Wonka 2PL. The M1 and M4 counters are constantly spinning, regardless of whether the coinmech is connected or not. The machine works normally and I can play. Any ideas?
Back
Top Bottom