Recent content by playthegame119

Looks sweet, this should be a lot of fun to follow. Good luck, repairing EM machines is a whole other field compared to video games so I never looked into them. Really awesome to play a working one though. Good luck with this!

Just tested it out and it looks like the previous owner has the gear switch flipped! Thanks for the help!

On a side note somewhat related to controls, when testing the steering wheel I noticed that once I passed a certain point while turning left the potentiometer would drop on its own all the way to the bottom. This causes some veering unless you hold the wheel off center to the right while driving...

I went into the test menu and got the min/max values for the break and gas. The min for both were 1fh, the max for break was CFH and the max for gas was D0H. The manual says for max break it's CB and max gas is D5 so I think I need to adjust the gas a bit. Does that seem right?

I recently got my outrun up and working but I've noticed that I can't reach the top speed. I can only get up to around 190 k/hr when videos show it in the mid to high 200's. I've been in the test menu and I don't believe the break is stuck down or anything so I can only assume something that...

Free untested blue happ gun. Pulled while deconverting my robotron. Untested and a little dirty but wiring all looks good. Free, just pay shipping. If anyone is interested pm me with an area code and I'll calculate the shipping cost. Would prefer not to throw this away.

Still looking. Bump

Looking for a working make trax board for my game. If anyone has one for sale please let me know. Thanks.

Found. Thanks for the help

Awesome! Cockpit games are sweet, if I had the room for one I'd totally buy one. Great price too!

EDIT: found a working chassis. Thanks everyone for the help. Looking for a G07 chassis. Would prefer a working one but would entertain offers from a non working one. Please PM me if you have one available. Thanks

Man I'll have to think about this. Can't get any more local.

Anyone know where I can find a replacement or reproduction sticker of the map that goes on the control panel? Mine is missing and was replaced by car stickers for some reason. Thanks

I checked ic2 and it was fine. I have replaced 2n3055 so that is not the issue. Pin 3 is giving the same voltage as testing +12 on the board, at around 11.74

I've been working on my robotron and I still have some problems with the power supply and it's not working 100%. Both the + and -5 volts are good, within .05 volts of perfect. The 12 volts, however, has been off at around 11.72 volts. I have done the deluxe repair kit from bob roberts and...