Recent content by P1Tech

Anyone ever use these? I need to replace the sticks in my fighters pretty soon and was thinking about switching the old Ultimate ones for the 360 ones. Anyone have problems with em? I've heard mixed reviews, but mostly good. How about longevity? Optic Problems? Love em, hate em? Thanks in...

Here's a couple of sites that can help you attach a regualr Jamma harness to a 15pin connector. If it'll work with your monitor or not all depends on what the monitor can do and which game it is. Standard res, med res, high res? A lot of things come into factor with these. 15p Pinout VGA...

Well I got recently got the kit and I'm trying to hook it up. And you are correct, after doing more research the monitor is dual polarity and is med res. So it looks like my problem is with the resolution, which sucks. Now I have to find a new monitor or cabinet

Oh, one more thing, in the manual it says 74LS04. Doing some research on the net, this looks like the IC chip that I need. Still trying to figure out how to install it.

OK a little back story first. I have a Street Fighter III, 3rd Strike. It runs on a Capcom CPS-III board. I tried to hook it up in a Midway cabinet for The Grid and all I got was a split rolling image, after thinking there might be a problem with that chassis board or tube I tried it in...

Anyone know where I can find one?

UPDATE: OK, looking at the board it has a number on it 210-0366-001. So I googled it and it turns out it's a 3dfx Voodoo3 2000 PCI 16MB Video Card. So If I can find one of these boards at a computer store would it work???

Hey all, I have a SF Rush 2049 video board that's gone bad. I sent it out to Betson and it came back "unrepairable" I talked to Happ and they don't repair or sell any more. So I'm kinda stuck. Any suggestions??? The video board is number 20-10565.

Hey all, I don't have the exact model number on me right now, but I have a Rush 2049 and the monitor is taking about 30-45 minutes to turn on each day. Any advice on where to start? I'll get the model number in a bit if that will help.

Good call. That was the problem. The pin on the jamma connections had been bent. just kinda tweaked it out now it's fine.

Now I didn't check to make sure that the ground was connected the right way, but I did pop the wire off the button and put it on the start button, thus using the start buttons ground, which I know is working, and the button still didn't work. So I decided not to even check the ground, plus it's...

OK, this is a weird one. I have a DDR and one of the buttons doesn't work, I'm talking about the buttons on the console not the stage. It's the player 1, right select button. OK, so first thinking bad button, but I tested it with a multimeter and it's fine, still just to be sure, I hooked it...

Sweet, I finally got it up and running and the solution was a whole lost easier than I thought. The Fuse blocks were just old, not making good connections and one of the tabs was broken. A trip to radio shack and $10 later it's all good. I replaced both fuse blocks in there just for good...

OK, I havea cocktail Pac Man and it's started to have a few minor glitches on the screen. Now it's real bad. I get a flashing problem and I can't really read it, it looks like it says ram error or something, but it blinks certain parts and there's a few images of Pac and the ghosts blinking on...

actually the file size is only about 800mb, so that's something worth looking into. I'm gonna try it with a new hard drive and see what happens, I didn't see anything about a page file adjustment, can I do that with it hooked up as a slave or do I need to do that on the actual machine?