It definitely needs to be random trigger with enough delay to forget about it before it comes back on. I wish you hadn't posted this as it is driving me nuts trying to figure out where it came from. I've see ALOT of pins and video arcade machines through the years, and would have definitely...
If you are going to collect these things, you are going to have to learn to work on them, and we ALL have dealt with stuff like this. Not sure about your prior experiences with this dealer, but "working" games can often break just moving them across the room. It happens. They should have...
Pictures below are courtesy of @vagrant13 who recently sold one of these. These are the pins that are normally damaged and this is how it looks if repaired correctly. If you fix it, you might need to take a look at the Jamma Connector as well. If you hack it, it doesnt matter if the power...
That Vegas boardset is very power hungry. Unplug the Jamma harness and take a look at where it plugs in to the pcb. Chances are you will see burned marks or damaged fingers where the 5v comes in. This is right beside where the 4 wire molex plug goes to the hard drive. If so, this is your...
Id hate to see them damaged in shipping. Guess ill hoard on to them a while longer lol. Guaranteed these are going to be sought after as the 19" mid res wg stuff is these days. Lots of candy cabs with lots of burn.
Sitting here chilling at the beach and catching up on some reading with the sounds of the waves. Wish I had read it earlier and I could have tossed a couple of these in the back of the truck on got them atleast to the pan handle. I have a couple burn free ms9-29su with guaranteed unworking...
Salute!!!! This machine is the only one that I was so impressed to see there that I had to get a photo standing beside it. On the second day when you had the mold of the Georgia State Capital I talked with someone there that mentioned that the mold had been retired about 30 years ago and was...
So many folks are afraid to bring vectors, but I had confidence knowing you had your hands on them. I thought I was going to have to pm you as I noticed on the 2nd day that the image was skewed, as if the cab was leaning to one side about a half inch. It didn't get any worse, so I let it ride...
Yep, took a look at your post and recognize that as being one of the ones I brought.
We always take the swap meet money we make and have a shopping spree with all the other vendors, so thank you!
I have followed the SmartyPi since it came out, but from what I recall, it does not yet have support for the motion cabs.... if that has changed, I need to get on the list!