Recent content by mwade109

Can anyone tell me what Sega system this jamma adapter goes to? I was think a system 16 but I cannot find any others that look like this on on the internet, many, many other styles, except a old listing for a MVP pcb and it has this with it. I have no use for it and want to list it but I would...

Wow, I am surprised you did all the heavy lifting to research my every movement when a simple 'it is a jamma board' would have been much simpler.. I wasn't looking for a hard time when I posted the question but you can rest assured that I will not ask another question. Your name indicates you...

Thank you, I just want to see if it gets video.

Thanks for your help, I really do not think answering two questions, is it jamma and know anyone that test boards, would be considered 'heavy lifting', or spoon feeding. Thanks for the entertaining answer.

Thanks, Couple things, is this a jamma board or just a jamma looking connector? If jamma, can video come thru the jamma connector or does it have to output thru the onboard 6 pin video connector? If all else fails, is there anyone that will test this board for a nominal fee? The board will be...

I am about to put for sale a old Arnanoid cabinet, the only electronic item left in it is the spinner. Any idea on how I can bench test this spinner? It is the board in the pictures that say 2 gear. I have no problem testing the resistors but do not know how to test the ir parts with only my...

Hello, yes, the pot has 5v on it. On the picture, the spot I marked has a wire that from the looks of the bend, came from that other pink wire attaches to the left side of that fuse. The connector that it looks like it is off of shows no signs of ever having a second wire on that connector. I...

Does anyone know where this movement driver board might be located in a upright Afterburner cabinet? I am working on one that won't register any left/right movement. I took out the pot and it tested perfect, this post by SegaMad gave me some hope of actually fixing this thing but I cannot find...

Thanks, I tried looking up any numbers I could find and came up with nothing. Even now, I tried 9E54 and nothing then 9E54 #1566 and nothing. I did see there is only 5 games to choose. Anyway, thanks for solving the mystery for me! -mike

Hello, I am wondering if anyone can identify this board, I googled all the numbers and came up with basically nothing. Next step would be to setup a test jamma rig but hoping to avoid that if this game is basically a d grade game. Thanks -mike

Hi, Can anyone tell me what size cf card is needed for a hard drive to cf card conversion on San Francisco Rush The Rock Alcatraz Edition? -mike

Andrewb, thank you but you seem to think I am a capable electronics tech. My electronics knowledge consists of looking at pinouts and using common sense to hook wires together. My multimeter capabilities are continuity, testing voltage physically removing/replacing parts that are obliviously...

VectorCollector, ChewbaccaBox, Thanks for the help, seems the power should not be a problem, I was not aware that the video was on the secondary connector. Not a big problem either, has anyone been successful hooking it to a cga to vga card? If so, please let me know how the connections go, I...

Does anyone know if I can just plug a centipede board into a regular old jamma harness just to see if the board powers on and gets video? I have two of these boards, one of them has a red sticker on it so I assume it don't work but I want to see if either of them will power on before listing...

I have a few of these old Mars bill acceptors that are really bo good for anything but $1.00 bills. These are ac 117v and what I wanted to do with one was make it into a 1.00 bill bank. Is there any way to make it a stand alone acceptor (when I hook them up to power they spit the bill back...