Recent content by Matt Fisher

Off the top of my head, I will add: Red Baron does not work with analog controls. Top Gunner is either way too slow or crashes depending on mame version. No sound samples for boxing bugs. All in all, due to these issues (and others already mentioned) and unique control schemes, I have ended...

I'm running a win98 install booting straight into dos, and it's fine. These instructions should work. Don't know about 3.1 or 95... http://pressf1.pcworld.co.nz/showthread.php?40142-How-to-start-win98se-in-dos&

I'll get one this weekend if I can get it off in one piece, or at least something I can reassemble... Thanks!

They're 9"x2"x1/2" plywood stapled 1" from the sides with 3/8" overhang, at least on mine.

Etienne, The sticker is exactly 20 inches by 3/8 inches (50.8 cm x 9.525 mm), so it seems that it would fit. It has 22 sections, but not all are the same width (the part over the the high F key is wider). What do you need from me? Scans? Pictures? Just let me know! -Matt

Etienne, what is the upper limit on size? I'm interested in having the strip above the keyboard for an Optigan reproduced, the one with the numbers on it in the picture. Looks like it might be around 60-70 cm long, but I can measure tonight to give you the exact dimensions if this is a...

The sound is a pain to be sure. Can't tell you how I got it to work exactly but I remember the final step was actually moving the card to a new slot without changing autoexec.bat settings. Just about to do some work on the cab so I'll be disassembling it soon. I'll post all the specs then...

Well, that was the problem! Solid as a rock now. Thanks arc and VC for talking me out of doing something silly. something to check for, g3n3r1c. Hope your solution is as simple.

Well, Amplifone stuff is pretty crappy, but I want to be fair. Tell you what, I'll chop everything up and send half of the pieces to each of you. :) Actually, I think I know what the problem might be, or a good chunk of it anyway. After I worked on the boards and reinstalled them, I put them...

http://youtu.be/lLf4rSwk0Zk Here is some video. Unplugging the light did not help. :(

That was going to be my first step!

I'll post some video tonight.

Fair enough! Followed the FAQ and the monitor is perfectly OK, just wondering if I could make it a little OK-er. :)

Yea, you're right, of course. It's not really that much and not noticeable during gameplay. Just trying to squeeze that last bit of performance out of it... I'll try to remember to get some video tonight. An old vectorlist post (from Zonn Moore, who should know) seemed to indicate that one...

Working on getting a 19" Amp back to 100%, and everything seems good except the vectors are a little wavy. They don't shake, jump, or break up, they just sorta look "rubbery" a bit. Not noticeable during gameplay, but enough to bug me. Anyway, I combed the Vectorlist archives and some...