Recent content by m_mcgovern

I would be interested, pending cost. Or, would you be willing to sell the plans to a KLOV'er to take to a CNC shop so they could build? Maybe to save $$ to ship these guys... Thanks!

I am also interested, I guess if Malenko passes. Thanks! I can pick up this weekend.

Thanks for both, especially for the schematic link. My pdf is not very good - hard to tell what is connected in mine. The link you provided is much more clear.

First, thanks for the response! Yes, my plan is to try to not shot-gun fix this chassis, so I plan to follow your advice. I will be replacing both Q713 and the Q712 upgrade. I will re-use C724 as it is in spec and looks like a cap that has been replaced previously. Many of the caps look...

Symptom is no video and clicking like a turn signal. I asked about this way earlier in this same thread, and the quoted text I included was your reply to me then. I started to follow your suggestions, but wanted to see if there were other things to check before removing more parts from your...

Just now, finally getting back to this. Ohmerone, or anyone else that has fought with a Kortek KT-2914, please weight in!: - I pulled the HOT, Q712, and verified very small resistance from pins 1(base) to 3(emitter) of 17.2 ohm on my digital VOM set to resistance. I plan to replace. - I...

Before: After:

Before: After:

This is now sold.

Holiday bump. Anyone that has any extra holiday cash after returning badly fitting sweaters? Let me know!

Last price drop to $60 shipped. Bump - price lowered to $60 shipped in CONUS. That's as low as I'll go. PM if interested.

After talking to someone that spent their professional career working on the CRT business, I am pretty sure there is more to it than 6100 yoke and 100 degree tube. The electron optics in the neck play a role. That is why I believe I could not get converged with the A63ADG25X tube and 6100...

The monitor is a 25" raster with a WG6100 yoke on it...that is why the convergence is not quite right. I have to rewind it. No 25" Amp was harmed during the project....unfortunately, from JeffC's POV, a 720 was harmed. But in my defense, it was a Major Havoc when I got it. I finished off the...

Yup. I bought it from you back in 2010...right away, I knew what I wanted to do with it. I thought I would be done in a year. :o No, the convergence is still not correct. The problem is that this tube will not work 100% with the 6100 yoke. The yoke either needs to be re-wound or I will...

Price lowered to $68 shipped Bump - price lowed to $68 shipped to CONUS.