Unfortunately the overview picture of the PCB in that thread has a lot of glare (and some minor focus issues), and the labels on the various ROMs and the color PROM are not readable.
Philip, this means the shifter circuit is completely nonfunctional (no matter what gets written to the shifter with whatever the shift amount is set to, it always reads back as 0x08).
Based on the schematics, this could either be a problem with the address decoder leading to the shifter, if the...
No speech means the CVSD chip at U18, HCI-55536 (sometimes HCI-55564 or HCI-55516, Williams/Midway used whatever Harris CVSD chip was least expensive at any given time as they're all nearly equivalent) may be dead or not receiving data, or one of the analog filter op-amps after said chip in the...
Unless the schematic is complete (can you link it?) it is no good. I need a schematic which includes the triacs/solenoid drivers for the coin lockouts and the counters, the logic parts, and all the passive components. This needs to be COMPLETE, not a 'band aid fix' like the suggestion of tying...
Superully, do you still have the cracked/broken PC030CM module? I'm interested in a broken module to remove the epoxy and trace out the full internal schematic.
LN
I'm pretty sure Capcom forbade the release of the 1942 schematics to make it harder for people to bootleg the boards. Fortunately for us someone must have, against the rules, photocopied a copy (probably from capcom usa) to help an operator fix a bad board, and the operator or capcom after...
Scucci: Your friend ran into an unofficial policy which the MAME team appears to USUALLY follow or usually followed: ROM submitters are/were not credited unless they specifically asked to be. This was done to protect the identity of people who did not want to be known to be sharing roms with the...