Recent content by Leif

Re: Daytona usa reset high score Leader lamp no work I've got my twin torn apart right now in the garage... when I get home and get a chance to look at it tonight or tomorrow I can trace the wire for you. From the schematics it looks like it feeds into a relay that's connected to the...

This is a new thread since my previous thread (Daytona Twin issues) had mostly been solved and morphed into a new thread. I want to say thanks to everyone that's helped me so far and a big huge I-owe-you-several-beers thank you goes to VectorJunkie for lending a hand in person with this one...

Special thanks to Vectorjunkie for coming out and helping... no doing this repair! Class act! All testing yeilded 0.0 or OL on Q901 and Q533. Replaced Q901 and Q533 with new transistors. Monitor came on but with a white line across the middle so there was a collapse. You could see the...

Offer still stands.

Yea we've been talking over email about issues... I had a nerdgasm when I saw that collection. Still gives me shivers to see it again.

That's a freakin deal right there as long as you have the real estate to hold something like that. This coming from a guy with a Daytona twin though.

PM sent

Thanks for all the help guys... VJ I may take you up on your offer. I pulled the chassis today of the monitor and the anode cap was only connected with one prong. I fixed that but that didn't help. The bottom of the chassis is definitely showing some repair work as there is some sloppy...

some more info... All boards are checked and verified. Only had to replace the amp. Monitor is still being goofy. Replace the 2amp and it pops the 6.3amp. Replace the 6.3 and it pops the 2. For some reason it was configured as low res instead of med res. Switched it and still nothing...

That's a man. ...and that cab is pretty cool looking. Very simple and clean.

Nice! I wish I could have met up with you to school you on some sega racing! I did see a SEGA Harley Davidson almost fall on someone's wife while playing... the guy just BARELY caught it. It looked like the upright portion was only connected to the base with one bolt on either side creating a...

You can do the same thing with gorilla glue. Once it hardens into foam run a solt cutter down it on a router and voila... simple fix. Bondo would be the obvious fix though. Mine is just kind of hacky but it works well.

Schematics found! http://technical-department.servegame.com/monitor_schematic_diagrams/nanao/ms8schematic.jpg If this is true, then I need a 3amp fuse, not a 2amp fuse like the one that is in the working cabinet. I wonder why the working side was working with a 2amp?

I'm still hunting for schematics... the only thing that I can find right now is the correct photo/model # of my board. This is definitely the little guy that's giving me issues. Fuse is on the right in the middle.

I was looking for 125 or 250... I remembered that from HS electronics class (who would have thought). Fry's was a complete mess in their fuse department... stuff was all mixed in and not where it should have been. I'll give it another whirl next time and also try the 'zone.