Recent content by lale1974

Hi to all, a simply question: which air compressor i need to replace the one on a sega rally deluxe moving seat? the seat seems to be complete (actuator, valves, pipes etc..) but compressor missing. someone have pics? schematics? something? thank you very much :-)

Yes, i know... And I haven't it :-/ but I good I' find it :-))

Crush roller doesn't match... Mine is 22 pin and rather different... :-/

'Cause i found it following your link :-) Btw there is http://www.andysarcade.de/asterock.html Simple as searching it... :-)

update: asterock found just now :-))))

asterock http://i1329.photobucket.com/albums/w556/alesghirardi/asterock1_zpshk3kkmek.jpg magic worm http://i1329.photobucket.com/albums/w556/alesghirardi/magic%20worm_zps7em5bxfd.jpg double block t3 http://i1329.photobucket.com/albums/w556/alesghirardi/double%20block%20t3_zpsndsdc7dl.jpg

thank you, later I'll post the pics. Magic worm haven't Centipede pinout, already checked (I have Centipede too) Now I go to test crush roller. ps I backtraced +5 and Ground of all these pcbs but I can't figure out how find sync and color (or B&W for some)..

hi, I noticed you have/had a magic worm cab, I desperately need the pinout of the pcb, can you help me? thank you very much

Hi I need help! Who knows pinouts of these SIDAM pcbs? Magic worm Asterock Crush roller And SEGA Double block T3 Thank you to every tips :-)

Solved Solved, Thank you They are two 220uf 16v

Hi to all, Only One question: i have a BB bootleg Pcb without 2 caps, someone can tell me which caps? Thank you :-) http://i1329.photobucket.com/albums/w556/alesghirardi/Mobile%20Uploads/2D362231-FFD6-40BF-826D-5A0052DC7340_zpssi21sgdw.jpg

Reset circuit? For What? How does it work?

thank you, the little board is a kind of mini input for voltage +5 and ground (tracked from TTL) on its lower side there are a resistor and a electrolitic , but it's soldered and i can't see very well. i backtraced the T connector on lower board and found +5, +12 (from audio amp that was cutted...

hi, I have a qix bootleg pcb, the problem is that i don't know if it works or not, i haven't pinout and i didn't find them anywhere... it's a 2 layer pcb with a 22 pin o upper board and a "T" connector 18 pin on bottom board. I don't know if it's complete, there are some empty spaces but I never...

Tank video issue Hi to all I just received a tank pcb set, in good SHAPE, now I will try to run it but I have a question (more than one :-) but let's start with this one..) How I can connect the pcb to a tv (if I can) or how I can connect to a arcade monitor? I have all schematics and pinout...