Recent content by KombatMame

is anybody willing to give a try on a repair on this board? if the rom swap/reburn still changes nothing, i'll be willing to ship it out no matter where on this planet.

thanks for your offer, i try to get them reburned over here in europe, i think the shipping from austria->usa->austria would be a bit expensive ;)

I changed the AD1851 and TL084CN chips and replaced the Y1 crystal and big cap near the heatsink -> still no startup boing or sound, no sound led activity :/ theoretical: if you boot up the board WITHOUT sound roms, you should still hear the startup boing sound? -> maybe the sound roms are the...

Interesting, found this site: http://www.flyback.com/products/index.php?command=viewAccesories Looks like on Zenith chassis (with the box between flyback and anode cup) they used something like "H.V. CABLE WITH CAP AND BLEEDER", e.g...

Thanks, ordered one for MTC 9110 overseas.

Great stuff, this means i can finally get me a spare flyback for my beloved K7000 :)

Sorry for digging up this 5-year old thread! Regarding the "have all Zenith-tubes a Zenith-fiddled-K7000-chassis" question: I have a nice working K7000 (#K7197) in my dedicated Mortal Kombat 1 machine. The picture tube is a Zenith G-A63ADG25X. When i compare my chassis to the "Zenith-chassis"...

Hi guys, I recently got a Hantarex MTC 9110 25" monitor with a bad flyback. I have 3 new flybacks for the Hantarex Polo 25" on the shelf, anybody know if they are interchangeable?

Great news hailrazer!! I also replaced my AD1851, sadly to no avail.. (have to recheck solder connections) Still waiting for the TL084CN to arrive.

The sound roms test fine and the jumper is in the right position. I'll replace the Y1 crystal (got a used one from chad@arcadecup) next, followed by the AD1851 audio dac and TL084CN OpAmp. (waiting to be shipped overseas) AD1851 ~ 15$ TL084CN ~ 3$ / 10pcs Problems with the AD1851 and TL084CN...

Ok, I'll be ready to scan the cabinet middle/end of march (cab is in storage) Stay tuned

UPDATE: No Bong at startup No Soundrom errors on startup and test mode No "Sound active" LED Static on speakers Then i found something interesting: The board has solder pads labeled "AUX IN" and "LINE OUT". I cut a mono audio cable and connected it (GND on "1") to AUX IN and hooked it up to...

Thanks!!! I contacted Arcade Boneyard.

I'll scan both sidearts and stitch it into a massive L+R photoshop. Anybody interested in cleaning them up? My cab has some (minor) scratches and gouges in both sides ;)

Big thanks!!! I'll order the MK1 sideart from rich anyway, great if the CP sides are included! (didnt know that, it isn't described on his website, but CP sides are included in the MK3 sideart)