Recent content by jukebox10

Having a little problem with my C. When you put the coin and select a record to play the flywheel turns but no action, motor will run continuously. I have scanned the carriage to k9-k10 record space, left it in scan and did the adjustment on the adjusting screw, but it still doing the same. If I...

Black Knight pinball game boots up OK, but when you put coins in and press start ball does not go into trough. The assembly tries to put it in, but only makes it about half the way before it tries again. Maybe after 10 tries it will put it in the trough. Have changed the coil out on the...

Purchased a golden tee complete flash drive for green board. Seems the the boot chip does not want to boot up. Boot Chip is Eagle u15 v2.08. Looks like one of the pins on the chip has been damaged. Can I purchase a new complete boot chip and it will work with the hard drive I purchased? If so...

Golden Tee Harddrive failure Ribbon cable replaced - still same problem - replaced harddrive with flash drive still does not detect harddrive. - even though I have the correct voltage going to the harddrive maybe I still have a power supply problem with the board. Thanks for responding

Power applied Game appears to come up with message saying "detecting IDE Harddrive" counting up to 35 error message appears NO HARDDRIVE DETECTED code 2 will reset in 10 secs or press start. After 10 secs big red box saying NO SIGNAL then resets back to detecting IDE harddrive goes thru sequence...