Recent content by Judder

7 years later but needed this today and still works perfectly Phil :cool:

That's a super handy post above - for anyone else also trying to find our why their Zaxxon board isn't syncing with a normal monitor (or SCART TV in my case), on Zaxxon the switch is also on the top Sound Board but is called 'Sync Pol.' - in the middle near the RHS edge when looking with the...

Bump for these - still for sale - haven't logged in for ages (years!) and hasn't been a priority to move them Regards Alex

I did a quick check on eBay yesterday, and Super Sound I/O boards in the US are being offered, tested working at about $225 / $250 a board https://www.ebay.co.uk/itm/193889101841 https://www.ebay.co.uk/itm/TRON-Midway-Arcade-MCR-SUPER-SOUND-I-O-PCB-WORKING-Restored-Tron-/193852456150 A full...

Due to our recent office downsize I had to sell the majority of our cabs, so now that I have parted ways with our Tron I have all of my spare boards left, so thinking of selling them on 3 x MCR II Super CPU Board A082-90010-C000 1 x MCR II Super CPU Board A082-90010-E000 3 x MCR II Video Gen...

Thanks! It's for an upright and in my head I thought it had some markings on it rather than just being plain glass / plexi Greylite 14 is the colour of the plexi to get? (excuse the probably obvious question!)

Building a Tempest cabinet and looking for any parts, but ideally the front glass panel Thanks!

I have a Moon Cresta board but I'm in the UK - anyway drop me a PM if of interest

In my case the choke / inductor had burnt out as well on the Super CPU board (L116 is the connection to the 12V part of the circuits so that had died). CP20 on the Super Sound I/O board was showing as straight to ground, but after I removed it it tested fine as a 10Mf Capacitor so I looked at...

Tracing the +12V line That's great advice - many thanks and much appreciated So looking at the schematics the 12V is largely around the 3800 at D3 which gets 12V in through pins 11 and 12 from J2 on the edge connector (+12V is also at the diagnostic port pins 5 & 7 [one fat pin after the 1 &...

Thread resurrection, but I have the same problem where L116 on my Tron CPU board has blown and the CP204 on the Super Sound I/O Board is showing as short on the multi-meter so guessing that is the problem Can anyone else confirm if this is a common problem or @jetusenet whether this fixed your...

Ignoring the unhelpful troll above, still looking to get this cabinet to another collector rather than breaking it for parts Please drop myself or Alan a PM with any questions and hopefully it can be saved as a whole piece.

Tuesday evening bump... Otherwise I am considering trying to flat pack him to the UK - which sounds crazy but compared to the whole cabinet shipping might make sense!

Thanks Alan :)

The cabinet is located in Breinigsville with Alan from Alan's arcade - I believe some of you know him well The photos above are the only ones I have at the moment but I have been asked for a picture of the power supply so will ask Alan to take one and post it up Regards