Recent content by jrrobin

Before and after Robotron resurrection. Running a jrok Multi Williams. Had some peeling on the stencils as it was my first time using them.

I converted from the ArcadeSD as well. I used one of these. https://www.ultimarc.com/optipac1.html

Kickman, What emulator did you find worked best with the Namco collection roms? I am currently using 106 and while it seems to run at good speed the sound is really bad in vol1 original Galaga.

Apparently I have two accounts :-/

Here there be dragons.

I have the trackball working on all of the emulators that use and where its possible. I don't think mame4all has any support for mice though. Here is what I did for advmame.sdl.rc device_mouse sdl device_raw_mousedev[0] auto device_raw_mousedev[1] auto device_raw_mousedev[2] auto...

That was it. The answer is yes a broken vertical hold pot can cause vertical collapse on a k7000a. Thanks security and tron guy.

Did anything come of this idea?

I had a servo stick in my arcade sd cab but ultimately switched to a dedicated 4 way. It just didn’t like the feel for Ms Pac Donkey Kong etc.

I just recapped a k7000a that was working fine before and when powering up I now have complete vertical collapse. Upon examination it looks like I cracked the vertical hold pot. I am going to repair it of course but is that likely the cause of the collapse?

Yeah I didn’t want to have to do the convergence setup again I had done it a couple of times before with two different g07 chassis. I will go ahead and do the cap kit when it arrives. The good news is behrmr was spot on. I turned each of the color drivers down and the squiggles on the test...

Over the holiday I bought a WG7901 from Craigslist while visiting my family. My dad also gave me an old 19 inch Magnavox tv. The tube in the WG has burn in from some video slot machine game. It was a a48abk05x. I pulled the cover off the TV and what do you know it has a a48afn40x. Tubular...

I will take it

Well I replaced the 4016 but that did not fix the issue for me. It did seem to reduce the frequency of the occurrence but it did not go away altogether. It is now fixed but I am still scratching my head as to why. After testing the board after installing the 4016 I decided to go ahead and...

Thanks. That video is what sold me on the hot air station. Mine will not clear the holes like that either :-(