Recent content by joe3693

$350-500 is the current going rate. $350 is average. Higher end only happens in desperation…..

$100-150 untested $150-200 working $200-250 refurbished

4 different VS/Playchoice guns exist. First all rubber in orange or black. They are problematic and can't be repaired. I would avoid them. Then there is orange or black plastic guns that say nintendo on the side. They can be cleaned up and repaired if needed, so those are the ones you are after...

Yes it will run. You will have to install all 12 eproms, 2 cpus and 2 PPU’s though. All 12 eprom games like balloon fight, baseball, tennis will all work in a single monitor, but you must use both sides completely populated.

I would not put them in a bag. That could trap internal moisture. Just a heavy duty cardboard box would suffice or a wood crate. The only time you would really have to worry about a crt in the cold would be firing it up when it is too cold, the warmth would create quick moisture, since you are...

As Arcadedoc524 said it is likely the LM3900, they are notorious for it.

$50 shipped takes both. Both open to 13 inches.

Bump

Did you contact Mike? Is it set to CGA and not VGA on the 412in1? I see mike lists a 60in1 to nintendo Jamma adapter, does it also actually work with a 412in1? I know the wiring for a 412 isn’t 100% jamma standard….

Carnival wiring and buttons. Not sure if it is complete or not. What you see is what you get. Wires seem to be in good shape, along with all the connectors. $50 takes it all.

Bringing you what will probably be the last Multicart I will offer, rounding it out to 4 cart choices. Arcade Classics, Famicom Classics, Nes Classics and now Nes Classics 2. Enjoy 5 classic Gun games and 4 joystick games. Its a nice 9in1 cart. $120 each. Get yours today. Everything on...

9 year old thread bump…. Fun…. Just get one of these from @apswann https://arcadeadapters.com/ols/products/nes-zapper-adapter Great product, works, and a zapper is more fitting if you can’t find an original revolver, over a happ.

That would be Me, and my site is also https://www.pc-10.com/

My guess would be you don't have it installed far enough.continuity isn’t always enough. Just because a meter beeps, doesn’t mean enough is installed to get proper voltage or transfer proper data. Daughtercard pins are huge. People usually do something like this: solid flat surface, use both...

That instructions card is for the redtent, not the upright. I wouldnt use it. You could contact someone like https://www.szabosarcades.com/ And see if they would do a custom marquee or little instructions above the CP for you. Not sure of all the choices or qualities available from others as...