Recent content by joe2012

Someone is selling bootleg hard drives. I bought one of those from someone here on KLOV. Thank God I had the original hard drive that the machine came with. That one was able to be upgraded. I was told when you look at the bootleg hard drive there is no run on it, no matter how long you use it.

Anyone that needs an Arcade Legends One fixed I highly recommend [email protected] I'm in Pennsylvania and I shipped it to Las Vegas where he lives. He told me to go to Fed Ex and they packed it real nice for shipping. I sent it Ground, it took awhile to get there. Shipping there and back...

Plug I just pulled the back door off my pole position. Mine is an upright cabinet. Not a sit down. I have three plugs just like you have going to each board but I do not have that extra plug that you are showing.

Arcade Legends Still looking for help on this.

Width Coil I have one that removed correctly as per Bob Roberts web site, it's from a 19K4625 chassis. I will sell it to you for 35.00 plus whatever the shipping costs are.

Arcade Legends Yes, both our games worked perfect until our batteries went dead.

Pole Position When I bought mine seller did the ground mod and new fuse block. Mine has worked perfect ever since. Graphics are average and typical cigarette burns on the plastic bezel. Love my Pole Position!

Primer It depends on what you are looking to achieve. If you are looking for the best job then yes you need to prime. Primer seals old finishes and allows fine scratches to be filled before a new top coat is applied. But in your case you say you want to use a foam roller. That tells me that...

Dongle What dongle are you talking about? Nothing fits into the front of the PC Tower.

Back to original settings I adjusted it to the original settings

CGA scrambled Monitor with no sinc

Integrated Peripherals At Integrated Peripherals if you set it at 378/IRQ7, the VGA picture is one solid screen. If you set it to 278/IRQ5 then the VGA picture divides it up into 4 pictures on the VGA screen. Keep in mind that I want my 25 inch CGA monitor to play it correctly. It worked fine...

Advanced BIOS Under Advanced BIOS I have these settings, the 3rd page is a continuation of the 2nd page

Adjustment Under standard CMOS Features under Video, I adjusted the EGA/VGA to CGA 40 and CGA 80 and neither works.

Bios settings for my tower Here is the page in two parts listed at Chicago Gaming website for my tower