Recent content by jbaker

zenith flyback i sent you a response.

k7000a flyback cost how much are k7000a flybacks ? i know they are hard to find ?

Has been SOLD. ZENITH Flyback 95-4149 Brand New Hard to find it has been sold thanks. I Have a brand new zenith flyback 95-4149 i believe these fit k7000a or a zenith g07 i paid $35 dolllars for it. asking the same price for it. i have no use for it anymore...

ok so i had a working stargate board set. i went with the ram upgrade i used the power adapter and put all new 4164 ram chips but i found out i put one of the chips in backwards so i replaced the chip with a new one. but now all i get is the rug pattern and the 131 error. so i was wondering...

is anybody here building virtual pinball machines here. i have a rock and bowl cabnet i need to get out of my garage i think it would make a great pinball machine it is a nice and solid cabnet the inside guts have been taken out but the lights still work. $20 bucks takes it. im in tucson az

sound amp it's not on the pcb it's mounted separately like Db Morbis said look by the coin door to see if you have one like this. go here to see what it looks like. https://quarterarcade.com/mr-do-amplifier-4561

does anybody have paint codes for a sega turbo cockpit I have some scratches in the dark blue that needs touched up. thanks

it wont let me commit to buy the little circle on the right just keeps spinning. any ideas guys?

I have the same problem the site wont let me pay ?

take it to a welding shop and have them fill in the groove then grind it flush with the surface then take a drill the same size as the hole insert it from the backside and drill off any of the weld that's covering the edge of the hole to make it perfect round again. that's what I would do. they...

I have the original stargate boards im using. the jumpers only move it to the left but not to the right enough where I need it. I believe there is a chip under the small metal plate on go7s that is soldered to the board that controls this. you have to remove this metal plate to put a new IC...

do you have a pic of the backside of the tube ? if the sticker fell off with the tube number I think your out of luck identifying this tube to see if you can use it. if you took this out of a tv look in the tv case for a sticker laying on the bottom some where if it fell off. how do you know if...

I didn't mean to hijack your thread I just posted because we have similar problems. can you get to the rug pattern to see if it covers your whole screen like mine does. im just wondering if its a board issue ?

I have the same problem with my stargate. except mine is off a half inch on the right moving all the adjustment I can move the picture more to the left but not to the right the chassis was rebuilt by a good member here. so I just stuck it in the corner for now to figure it out later when I had...

what kind of boards are you trying to swap out with. not jamma I hope