The reset looping came back and got progressively worse.
I ended up testing some theories on voltage drops in case it was a power issue, just in case
Just finally got it fixed today by taking a spare harness from Ken and repinning the Japanese connector with Molex and it worked immediately
I...
Hi everyone,
I’m looking for help identifying a connector on a wiring harness that I have.
12 pin, I think molex
Pitch 5.03mm
Pin diameter ~2mm
I was trying to find an exact match but looking at molex 003092121, it looks like it’s not an exact match because it doesn’t have the same “wings”...
I took a visit to Ken to get my wiring harness checked out and to repair my backup card reader and gd rom drive.
Wiring harness (reader side) was ok other than that broken pin, which Ken kindly fixed for me.
I ended up checking all the pins and continuity for the harness at the back of the...
I think my dumb luck ran out with the looping card reader.
Over time, it would take many many tries unseating and reseating to get it to work. Eventually, it just stopped working. Also…I accidentally pulled a wire out of the connector pin.
Going through the chain to figure out what’s going on...
Reassembled the steering assembly.
Good news - the fuel hose is adding cushion so the stopping isn’t metal on metal clanking
Not so good news - at the end of a match, there’s now a squeaking noise when the machine vibrates.
I read in a YouTube comment that it’s caused by loose set screws on...
I decided to start working on the steering assembly today.
I followed the Sega bulletin and took everything apart.
The bumper on the steering column non existent and the one on the bumper plate was in bad shape
Here is a pic
The shaft itself was pretty locked up and I had to hammer off the...
Welcome! DDR was my first arcade game. Probably started around 6th mix and peaked with extreme.
Definitely ask questions here and on the the rhythm game fb groups. People are really kind and helpful!
Hey there,
Sort of long shot, but I'm looking for two copies of the initial d v2 (arcade stage version 2) disc/security key and also a pair of seat backs with version 3 art, which have white seat covers.
If you have any spare parts lying around for that cab, interested in those too.
Thanks!
visited Ken again today and got my gdrom drives and card readers inspected.
Left card reader was fine other than being “very crusty”.
Right side had a bad print head (it had some weird residue on it), which explains why it wouldn’t print names.
For my gdrom drives, I was getting error 24 and...