First off, congratulations !
Let me tell you a quick story that might help your decision. I have a working Spy Hunter. The previous owner had felt the same as some, where he replaced the old original PS with the newer kind thinking its safer. Sound has bad hum. Won't go away. I rebuilt the...
Ok, good to know only 4. If I ever get the energy, time and interest again, I have to try this. That said, when you say "all the boards", do you mean all the 100uf caps on all boards ? Or all cap on all boards ?
And what are the symptoms/issues that the caps on the other boards cause if they...
This is great news to solidify it would solve my problem with that. I guess I got to get around to it. Mine is extremely faint though, and almost unnoticeable to the average person, so this causes me to lag on the job. Exactly how many of them are there to replace ? And only on the CPU Board is...
You know, I think mine has this issue too. I was just chalking it up to some oddity with the tube swap I did. Plus its slight, so I wondered if possible imagination. But now you saying this, yes it looks like thousands of very very faint black lines that are alive and move maybe like static I...
I'm actually not really "swapping tubes". What it is is I came across a CR25 tube that tests great. Its a 19vxxx. Upon my research (here, and other threads about it) it appears the MC-2000 is a CR25 chassis/neckboard. And I happen to come across one on eBay (thanks to @Scumolabs) and hence me...
Ya'll are awesome ! Thanks
The confusing part was I was thinking the KB930355 was the name of the monitor, lol.. Got it, so this is the ever so classic Nanao MC-2000 series..ok.
So quick thing. I believe it is the S and not the R. Check out this eBay listing for the manual of a S...
@gars943, if you happen to be able to, could you please let me know what the neckboard neck connector size/name is on this chassis ? A CR-25 per chance ?
Or anyone else that has knowledge on this chassis know ? Thanks !
Thanks for this ! Lists out some tubes using it too. Awesome. I also found a list by cross referencing the tube on tubular site... So now the list is of decent size. Anyone with one of these tubes that wants a replacement, I'll give you this one. (locally of course)..
Monitors:
Kaga Denshi...
Sorry to bring back this old thread, BUT side note question - Are you saying this Chassis (Sanyo 20 Z2aw) uses a CR25 neck/tube pinout ? Anyone, please confirm, and thank you
This one got a less common neck/pin size. I'll supply more information below, but the question is:
Did any arcade chassis ever use this neck/pin size/shape ? If so, which one ?
Its called CR-25/CA-25 for BK Precision testers and its a UA adapter for Sencore. The neck size is super thick...