Recent content by indy5mike

I bought a Galaga that has a switcher harness in it. Looks a lot like the PacMan switcher harness i bought from Bob Roberts years ago. I have had some issues and am thinking about just removing the original harness and making a power board per the instructions on Bob Roberts site. This is...

PAC cabinet harness, PAC switcher or jamma harness? I have a Pacman cabinet that I am rewiring with a new harness. I want to use an actual PAC 6 version Spaeth board (not a multi game pcb). If I wire it jamma and use a jamma to PAC adaptor will the game play any different than if I use an...

If the 13 foot has factory frame and netting would you be interested in selling that?

Hey Mod, I am using 74 bulbs, what I am trying to say is if I pull all the bulbs except one or two the two left light very dimly. It's like they are not getting enough power. Could a bad resistor on the display board cause this or would it more likely be a power issue from the CPU?

Sorry it is not led and after the display is plugged in I get nothing on it. If I pull all the bulbs out but one or two they light very dimly.

WTB Skeeball model S net frame with or without netting Anyone one have a model S net frame? Skeeball wants a fortune for one. Mine has a PVC frame and while it works I would like to make this correct.

I got a non working Skeeball but have figured out it plays blind but as soon as I plug in the display nothing works. I socketed and changed the 8 chips on the display board in hopes of finding the problem but no change. Would this be a display issue or could it be in the CPU? Any help would be...

It was full of truth.

Why would this be moved? http://forums.arcade-museum.com/showthread.php?t=232768

Are these the neon signs on ebay?

Read the other neon post, does Mr.Gu give a $20.00 discount to KLOV'ers? I would like a Pacman neon.

Let me know if you are doing any Pac's. If they are as nice as that Ms Pac I would take one.

I am currently using a round 6 pin DIN to connect to my Commodore but it appears I will have to change to the 9 pin connector. On a previous post MrBill said: "The RGB input is with BNC connectors. I bought a couple of Apple monitor cables that go from individual RGBS BNCs to a 9 pin D sub...

How did you guys hook up the PVM-1354Q's? I found one but the din connector is different than what I use on my Commodore. Can anyone tell me the correct connector and the pinout? Thanks

All 3 are spoken for and have sent emails. Thanks Mike