Recent content by IClavdivs

I would be interested.

Sorry about the delayed response. I haven't had a chance or the drive to work on this since late March. I'm going to assume that the line filter is the problem. It's a cheap fix, seems easier than pulling out all the wires, and might explain the wonky behavior from this cab in the past. Is...

Pics Side View 1: https://drive.google.com/file/d/16TbE443m4FWz1oq7BbVdIuwh0oNwJQ0v/view?usp=drivesdk Side View 2: https://drive.google.com/file/d/1YWSi893DVzXfMjOFthzO4P84976tZbVb/view?usp=drivesdk Interlock Switch...

I think the device in the corner is called an AC Line Filter. I could be wrong. I borrowed a better, known-to-be-working multimeter and now the only reading I get that I understand is on one side of the AC Line Filter. I'm getting around 118v there. On the other side I'm getting around 58v...

I hadn't considered swapping out the front switch. I'll pick one of those up tomorrow and try that. I just swapped out the interlock switch for a new one, so hopefully that is not the problem. The original interlock switch was super old and the wires were soldered on. I crimped some quick...

Thanks for replying. The outlet inside is receiving power. I have an extender that lights up when plugged into it. The LED on the power supply is not on. I've actually tried 2 new power supplies. I accidentally left one set to 220 when I hooked it up, so when it didn't work, I bought another...

Power Supply: https://drive.google.com/file/d/1BDrEg_Ev7Y8yARDEDgWZ4R0hQ4IfAeUK/view?usp=drivesdk Wires: https://drive.google.com/file/d/1WuW0fIBWfAPWpA7epYdUg1BBPzhcjhSD/view?usp=drivesdk

Super newb here. I've got a Defender Cabinet that was converted to a SF II: World Warriors long before I purchased it off Craigslist. The board blew shortly after and I converted it to CPS2 with the help of a slightly smarter friend. That board blew, so I let it sit for 10 years or so. With the...

OK. That makes sense. I'll probably just replace that switch then. Thanks for your help everyone!

Sorry, I'm a little confused. My interlock switch points switch-side down, does that mean someone has already rotated it? Also I tried to pull it out with no effect. It could be I didn't pull hard enough. I was afraid I'd break it. Here's a very bad picture...

I was afraid you were going to say that. Guess it's a good starting place to practice my woodwork before tackling the rest of the cabinet. Last question and then I'll start a thread in the proper section, but the cabinet has a security switch that I've had to tape down. Is that standard on...

I think I'm going to sit on this for awhile longer, maybe look into restoring it myself. Anyone know where I can get a back door for it?

If memory serves, that was the SFII pcb that came with it. The first board that died.

I worry it would require a lot more investment than just adding a 19-1. I'd probably need different art and a different cp too, right?

You are probably right. The woodworking aspect of the project intimidates me though. I've never done anything like that and I don't want to ruin the cabinet.