Recent content by eviloval

A board I recently got would do the same thing. It would go straight blue (with any working HD). Pull the board, grab a magnifying glass and a exacto knife and start looking for loose pins. Start with the 74fct chips 1st (there are 21 of these small chips...and 1 of these little legs being...

I might want to be a little more specific (my fault). I've got a KI board (I've got 5 of them...to be honest). I've seen a upgrade kit that consists of a harddrive board (plugs in right where the original KI harddrive does) and by using that board your able to take a KI board and turn it into...

I remember someone mentioned about a KI move card....just can't find the post or remember who mentioned it (it may not have been this site). Anyways, is there someone out there that makes a real good one? If you have one I'd be very interested. I'm also looking for a KI to KI2 upgrade board...

Mine didn't say: Danger, Danger, Danger....even when I booted it without a harddrive (only a blue screen). I even had a corrupted CF card that would boot the game occasionally. It would either blue screen, black screen or boot to the game. Haven't heard it say that for anything at all. The...

Thank you FA-MAS...board worked like a charm! Still looking for 1 or more cpu processors (the 1 with a heatsink on it. I'm also looking for sram and ram (digikey has a 400 piece min on the sram...don't need that many). The cpu # is: IDT 79r4600-100ms....looking for new if possible or one...

39in1 and Zero Gunner are sold....please delete this post.

39in1 pending

Pm'd Exidy on Zero Gunner.

Looking for something new for a spare cabinet....so I'm selling or willing to trade. -39in1 pcb....works well, got it originally for Galaga and DK. Plays fine, sounds fine...there are some sound quirks with it (DK sounds are a little different). Obviously has other games on it...just wasn't...

What's the processor # (may be under the heatsink)?

Do you still have the KI2 board....pm info if you still do.

Interested in a board or 2....pm sent

Having some problems trying to revive my existing KI board. So, I'm looking for a working KI1 board with roms & HD (original HD....or cf/rom with a original HD). I would also take it without the roms and HD for a reduced price. Also, I'm looking for either a source of a new CPU chip...

My KI board was originally tossing me "SRAM error can't setup credit interup While taking a good look at the board I noticed there was some glue on a few legs in the corner of the Risc chip (the one with a heat sink on it). After removing the glue it turns out that 2 of the legs don't have a...

Thank you ToplessZ and armis2000 for the help. I will change out the boot rom to see if that is the issue before attempting to desolder the SRAM. I would rather try the easy way 1st than to start taking out the chips 1 by 1. I'll also get my hands on the chipquik to take the chips out (I'm...