Recent content by Epicfatigue

Hey Guys, So i have just picked up a cocktail cabinet with a Toei CM-R14 The issue it is having is the colors start off beautiful then they slowly fade off into nothing. I have atached a video of it so you can see. Things i have done so far.. Checked b+ seems to be okay between allowed...

I guess the part how to build one must have came to be a real shock, the work it took to write it up step by step for people in the hobby and you take the piss like that, now I know why people don't share these things good work mate

Hey Guys, not sure if this is the right place but i came across this on the net and i think it is awesome. For years i wanted one of these but they are just way to expensive, i just finished making one for $140 AUD and they retail for $650 AUD here...

Does anyone have manual or schematic of this?? Got two with the same issue, Two fuses blowing, and one 2200uf 25v cap bulged, with one of the fuses has a dead short somewhere with one out i get high voltage but no picture. Just seeing if i could save myself time if someone has the manual as...

Ill take your word for it and, ill go back and clean and clean until i think no more cleaning can be done. Then ill track down those chips thanks :) ill report my findings!

Hey Thanks for that, yeah it doesn't appear to be a contact issue, i tested from cart to slot making good contact on all pins. I then tested from each slot to the chips to make sure there was no broken traces. They all tested well. So i am guessing i have a dead chip or many lol, does anyone...

Hello everyone, So a few weeks ago i found the score of a lifetime, i came across this machine sitting in a decommissioned ICE Ring, the machine didnt power up the monitor was dead but it looked so clean and tidy i just had to have it. I just finished repairing the monitor had a world of...

Hello Everyone Michael Here from Melbourne Australia I am a SCADA Engineer, but after hours i repair All Arcade Monitors, and Power supply. with Generally a week turn around depending on how much of a back log i have.

I have not come across this monitor in Australia, but one thing i always check when i hear a tick is turn off all the lights and look at the annode cap and HV unit. Sometimes it gets dirty under there when you remove it to restore the chassis, if it is that clean the area then apply new grease...

All in time my friend all in time :)

Thanks Mate, i put alot of work into writing the program for that and making it open source for all those out there that would like a rotating monitor, however this controller i build doesnt just do that, it can control 40 + relays/functions In terms of the cabinet i really like it for a few...

Now i am yet to finish the top level i just ran out of time, the idea will be that there will be a glass window to be able to see inside the machine, and alot of other things, but we will talk about that when we get there cant ruin the surprise now can we? The bottom 2 fans draw in air to cool...

So i had a very productive day today, where to start? I guess we will start with the monitor. I have completed the front, i know it looks horrible but i am waiting for the glass to come and with the addition of decals and paint it will come up a treat! I have some surprises planned in that...

Thanks mate, comments like this keep me going! haha thanks man, i didnt think i liked them either but after seeing them in action they are awesome! they are silent :), however if something was to get hot the custom electronics will turn the fans up to lower system temps, if needed. I know...

Hey there fellow arcade followers! i am back and have put a full day in today and planning on another full day tomorrow! So where to start. I Guess a good place is the new addition to the cabinet... Yeah i know right? what could i be doing now! RBG Buttons to a PAC-LED64 allows every color...