Recent content by dlbuller

Anybody work on Gallag boards? Thanks

These work pretty decent. The feel is right although they are a little heavier. The look isn't perfect but pretty good. Pricey but a good option if you're missing some. http://shpws.me/OwHw

Looking for a nice pinball magic. Doesn't have to be perfect but I would prefer minimal playfield wear.

Still looking. 1500? Anybody in Iowa wanna sell?

Looking for something in that price range around Iowa. Thanks

thanks me too. The switches do have caps on them. thanks again for your help :)

Ended up being pia.

Thanks I'll try another cap.

Fixed broke Ok so I decided to change the cap on the switch at lunch. Seemed to work. Came back from work and changed the cap on the left thumper bumper. It works now Too. I started playing the machine and the middle thumper bumper stopped working again. I resoldered the cap and it worked 3...

Broke more Now it seems that I have broken another thumper bumper switch. When I run the switch self test, switch 38 chimes and sometimes 40. Did I take out the snubbers or are both switches bad? Solenoid test runs fine. Neither left or center thumper bumper work now :(

Was wondering how a thumper bumper would act with a bad switch. My middle thumper bumper will not work when the plunger is hit. I ran self test and the switch isnt working. However now when my slingshot solenoids fire, the middle pop bumper will fire. Do I just have a broken switch or a...

I have a silverball mania machine that I have done some work on. It now seems to rack up points by itself. At first I thought it was just from the switches needing adjustment because it would add points when the flippers were activated. Do I need to just make sure all the switches are adjusted...

great thanks!

I have a silverball mania self test question. I run the self test to the solenoid check. 1-9 work, but I can't figure out why 11 (flipper) won't. When the self test runs, and I hold in the flipper, it works fine. It's supposed to fire by itself right? thank you for any help you can give me.

Thanks again for the reply. So grounding the sound select yields pins 2-7 working, pin 8 produces no sound. Trace back to ROM board next? thanks