Recent content by Deathbyillusion

Wait so this isnt original paint on the cabinet? I didnt know how can you tell?

Ok let me post some pics but I meant on my actual cabinet on the side artwork its a little worn next to the edge of the cabinet where people would normally put their hands and there is spots that are missing paint from like chipped or scratched and was wondering if I should get that touched up...

Sand it Down? Its already painted back or something it thats what was underneath it and is smooth and doesnt have any bumps. The only think you can see is next to the screws is part of the decal which can be taken off after I take the screw off. Of do you me the actual cabinet to sand that first...

Whats the cheapest place to buy a control shelf decorative overlay for Ms Pacman? I have a Ms Pacman Machine and when I bought it a while back it did not come with a control shelf decorative overlay. I first I had forgotten it normally has one on there and then saw online some pics of one and...

http://www.channelbeat.com has alot of stuff like buttons, lights, glass front for the ddr machine, ect. You can check there too.

So first off I hope this is in the right spot. I just bought this Dance Dance Revolution Arcade Machine and this version doesnt say Konami on the front instead it shows 2 discs and in the bottom as shown in the picture below it has a Playstation 2 running the machine. So I start it up and the...

Thanks for that I got it now and it works great without the other +5 mod or whatever and I did this yesterday but I noticed noticed today when I turned on my machine it took a wile for the marquee light to come on cause you would hear a slight humming sound like it was trying to come on then it...

Im confused I just bought a M48Z02-150PC1 cause thats what I was told to buy got the High Score save for Tron and then im supposed to replace the new one on the B2 location? I dont get it cause I can't remove B2 without unsoldering. also even if I removed B@ the chip is a different size then the...

Ok this might be a dumb question but I don't know all the technical terms and kind of new to the parts so whats a ballast and where is it located?

Thank you, now can I just go to Lowes or Home Depot and get a FS-2 Starter and replace it? Do they have different wattage ones where I would need to look for a 15-20 watt one or are the FS-2 Starters all the same?

My Klax Marquee Light Burns Out and Blows The Fuse Every Time I Replace Them So every time I replace the fuse in my Klax machine and replace the light behind the marquee and turn on my machine the light comes on for a second then burns out and the blows the fuse. Anyone know what I need to do...

Im kind of new or a noob to fixing my machines and dont really know the technical terms so I have no clue what a FS-2 starter is, Could you please explain?

Having Problems With My Lighting Behind My Marquee On Tron So I put a new light bulbs in my Tron Machine and all work fin but when I put a light bulbbehind the marquee and it only lights up the sides of the bulb. So I replaced the holder that the ends of the bulb go into. I dont know what...

Its B2 the one the outer facing Board as you look to the right inside the tron machine from in the back rght? if so I dont know how I pull out the chip. Also did you have to solder a wire where the existing battery was to the plus side then to the +5 or whatever that was cause I dont understand...

Ok thanks but it looks like it requires it to be soldered right? if so I have never soldered anything before. Is it hard to do and where can I get a cheap soldering gun and solder? Also where is it that I have to take out the old chip & should I remove the board out of the machine first so that...