So as it turns out, I do not need any parts, the guy I hired to come out and do routine maintenance on the machine somehow plugged the amplifier mute harness into the open Rowe link socket on the CCC. After looking through the manual and block wiring diagram I noticed that the harness was...
My W100 seems to have blown the MCC, The gripper are functions, as well as the CD player spins but the magazine does not rotate. I have tested the magazine motor and it functions which leads me to believe that the MCC has died or at least the circuitry for the magazine portion.
As the title...
Hello have a favor to ask of any WP-100 owners. Would someone mind opening the ballast and giving me the resistor color code or the ohm value of R1 on the electronic lighting ballast board. I have a WP-100 and someone cut the old resistor off the board and I cant seem to find the value or a...
Have you attempted a factory reset? Using Dip Switch 4 and 7 on the IO board?? There could be corruption of the hard disk that is causing this. I have heard and personally experienced the factory reset cure all kinds of wonky illogical problems with these machines. In fact I had one last month...
Yeah the only operator around here I could find that ever had Meritt games sent all of his old ones to auction a couple years back he said along with any spare parts he had.
No that's not the case at all. these are not Lithium Ion batteries which are rechargeable and are made of a different compound. These are Lithium batteries and lithium batteries like the ones used in Ibutton's are for all intents and purposes the same ones used in your watch, in the memory...
I picked up a 2011 Megatouch Ion Entertainer Wallette recently. Everything seems to be working in good order but when I opened the machine up to get into the setup menu I noticed that the rear case that holds the motherboard, power supply, and all of the other various electronics was just...
Recently I picked up a Touchtunes Genesis. I would like to Take the touchtunes computer out and replace it so that I can convert the machine for home use.
Before I undertake the project however I am curious if there is a way to use the stock Bose Amplifiers and Speaker set with a generic PC...