cdjump
Reaction score
1,621

Profile posts Latest activity Postings Media Albums About Post areas

  • Hey Chris, do you work on Nintendo boards too? I have a Mario Bros. that displays a solid white screen with no sound or graphics. You fixed my Journey boards several months ago and it's still going strong! :)
    Hi i have a budwieser tapper board set that has some sound glitches and plays fine for 5 to 10 minutes and then goes blank its my familys favorite game are you able to fix it thanks you very much
    David Young 3852150663
    I am working on a Tron Upright that I dug out of an abandon house and am woefully under educated on the PCB repair side of things. What does pricing look like for repairs on these?
    Thanks,
    Caleb
    I have a hyper Sports board with no game sounds coming out, only hum and ringing. Many sockets and Fuji chips replaced but i have missed the boat apparently. Can I send this to you for repair? If so, please send shipping details. Thanks Much.
    [email protected]
    703 606-3803
    Tim
    Hey, I have a KickMan that has extra graphics at certain times.... fake balloons falling, etc.... Plus the screen seems to large for my CRT (but that might just be a cap kit) I understand you repair KickMan boards, so can you send me your address so I can get mt board sent off to you? Thanks! Stephen...
    Hi Can you check out a set of Tron Boards And repair if need for me I know On the Super Cpu the L 116 is bad and the C 133 C - 134 is bad. What is your time frame and do you know around a price to do them Thanks Mark Roberts Hillbilly pinball 865-828-4609
    *Revision: when disconnecting the J2 connector on the audio board.

    If your previous assessment holds true, those caps readily available? I figured it might be a short to ground issue.

    Thank goodness these are not multi layer boards.
    Troubleshooting a non-working Tron Machine. Just refurbished the cabinet, brought into the game room and it failed to start. Power supply LED flashes on briefly when powering up, hear the monitor power up but no power to the CPU. Verified connections, troubleshot by removing cables and found that when connecting J2 connector on the audio board, the PS LED would remain lite. Pulled the boards and reseating IC chips. Problem still persist. Looking for advice or maybe sending boards our for repair.
    I don't have any amps for sale, sorry. On Timber and Tapper, you can replace the 11 pin connector with an 8 pin connector that will work fine with the mcr2 amp. The simplest way is to look at a Tron cabinet schematic, and match the wire colors to the correct positions on the 8 pin connector.
    Hi Chris,

    I am putting a Timber together and I thought I have everything I need but I just realized that I have a MCR 2 Dual amp. Can I use that or do I have to get an MCR III Dual amp with mixer? My harness has an 11 pin connector and the MCR II only has a 8 pin connector. I read somewhere that there is an adapter harness that will make it work or you can do some modifications but im not sure I believe that. What are my options? I want it done right. Do you have the MCR III Dua;l amp and Mixer that you could sell me?

    Happy Thanksgiving!

    Steve 612-247-6128
    Hey bud... freind of mine had mentioned you.... What do you charge to repair a spyhunter pcb? Thanks
    Hi,

    Hope you can help me on MCR boards. I remember years back I was able to convert a Two Tigers PCB set to Tapper. I don't remember all the logistics of it but it worked. Can spy hunter boards be converted to Journey? Seems like they can but I'm not sure. Is there any kind of list that you have which shows what pcb stacks can be converted to other games via rom swap?
    John
    Hi!

    I have a Galaga PCB that isn't giving audio or responding to controls, but video is perfect. I saw your post that you can repair this type of thing. Can you assist? Thanks.

    Dave
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom