Buffett

Do you repair NeoTec NT-500... not powering up, instead it just ticks rapidly - sounds like a paint mixing machine. Can send video.

Sent email regarding chassis recap

Hello. I have an Asteroids Deluxe I bought about 5 years ago. Had a blue dot. I finally got around to repairing it. I replaced the capacitors, bottle caps, 1 fuse (F600) and reflowed solder on connectors. I still have the blue dot. Game plays blind just nothing on the crt. Do you repair these or can you point me in right direction? None of the leds are lit on chassis. Spot killer.*

Thanks.

Hi,

Jeff Keeley recommended that I reach out to you. Cracked the neck board on my Nanao 2931 and the monitor only displays green now . Any chance you have a replacement or I could hire you to fix it?

Thanks,
Mike

Hi Buffett,

Sent you an email about my monitor, not sure if you got it. I have a working Sanyo Ez that probably needs capping. Looks untouched and original. Was wondering your availability.

Thanks,

Denis

Hello buffett , how are you doing ? I noticed your site is down . I'm looking for a few things if you have them available im looking for the pots kit for the 7901 chassis and I'm looking for the neck board socket cr-31

Hey buddy, clean out your private messages! Your inbox is full and I can't PM you

Hey hey, will do

Thanks
Robert

AB, I've emailed a couple of times and have t heard back from you on the status of the chassis..can you please email me back as soon as? Best, mark..

Hi there Wondering if I could send you x3 chassis to take a look at.
x1 25" wells 7500 - HV shutdown blowing HOT Even after New flyback, C721, C723 all caps and reflowed.

x 1 25" wells 7500 - HV shutdown Even after New flyback, all caps and reflowed.

x1 25" U2000 series New fly, caps reflowed HV shutdown.

Let me know. Ross Mackie Email me at [email protected] or text to 651-246-6068

Hey ALL, please contact me using my email.

[email protected]

Thanks.

Peace
Buffett

Mr. Arcade Buffet

I have a problem. I have a Sanyo 20ez. It was working but when a lot of activity was on screen the picture seemed to shift up and down ever so slightly that it was infuriating. Of course everyone says cap kit. So i recap it and there was some bad caps. hook everything back, get my DMM ready with leads to set the B+ and my fiberglass rod.Turn it on, no picture but the B+ is working and adjustable. set it to 108, unplug everything and check the fuse. It's blown. Check the hot, its getting .530 to each leg. Check D601-604 all read about .535. Is there anything else I can check or do? I don't have any fuses or extra parts I would have to order everything.

Happy Holidays. Thanks for all the informative posts & sharing your knowledge, I really appreciate it.

Hi Buffet,

I am contacting you regarding the Double Punch Out board. From what I read, you took over the project.

Do you still have a board to sell ?

Let me know,

Thanks again,

Mark

I inherited a cabinet with an Orion AM-0316 chassis connected to a 25" tube. It worked fine for about a year, but required frequent adjustments to keep it looking decent. All of a sudden the screen would go crazy after being on for a bit, and the adjustments no longer had any effect. After some troubleshooting, I determined that even after disconnecting the synch wires, there was still no difference in the display, leading me to believe that the synch is lost somehow. The only thing that seems to get it temporarily working again is to turn it off, remove and add the little plug in adjustment board, then power it back on. After doing that, the picture looks fine again for a while. Any ideas or suggestions? Soldering is not in my wheelhouse, and I'm afraid to mess with it, as it may not work at all.

MAGFest Mike???

Hi, I'm interested in the #23 adapter. Still have some?

Hey there, looking for a CR-23 socket adapter. Do you have one made up and ready to ship by chance?

Hey Buffett , Whats the status of the Double Punch Out? I'd be vary interested in purchasing a kit .

Hi Buffett, I sent you a PM last week; can you take a quick look?