Recent content by Bsarc

I have an Asteroids Deluxe machine that seems to have continuing monitor issues. When I first got the machine, the game would play but there was a bright white dot in the center of the screen and the asteroids had vector lines coming from them. I lowered the brightness and that obviously seemed...

Rowe AMI Storm CD Jukebox internal lights not working I just bought a wall mounting Rowe/Ami Storm CD Jukebox that was converted to MP3 with the CD100MP3 conversion kit. The unit seems to all work ok except none of the fluorescent lights are working. I got new bulbs at Home Depot thinking...

Hi all- I have a Donkey Kong cocktail and it didn't have a monitor when I bought it...I was able to get a 13" Ducksan monitor that came out of a touch screen bar top game...To make it work in the game, I had to splice the video wires from the Nintendo harness to adapt to this monitor...It worked...

Hi all- Today I replaced the solenoids, rubber stops and rubber pads in the guns for my Midway Terminator 2 machine...After I put the guns and control panel back together, the guns still didn't vibrate when you would shoot...I then pulled all of the fuses including the one on the floor of the...

Terminator 2 advice Thanks alot Jumpman and RJL, great advice from both of you...Sounds like I got great advice from both of you guys...Thanks for the Suzo Happ tip RJL.

I just picked up a Midway Terminator 2 cabinet in great shape and the game works great, except the guns don't vibrate. I've taken the control panel off and noticed a couple ground wires were disconnected (Green wires with red clips, as well as a braided metal ground wire) and a couple red wires...

Does anybody know if a transformer for a Midway Revolution X will also work for a Midway Terminator 2 machine?

Hey- Today I picked up a non-working Midway Terminator 2 upright machine for $200.00...Besides not working, the cabinet at the bottom looks like it may have been in contact with water as the bottom is chewed up a bit. The bottom base of the cab will definitely need to be replaced and a little...

Wells 19K7203 for pacman Thanks much Modessitt and Buffett...I'll let you know how it goes and post pics...

Wells 19K7203 for Pacman The old monitor tube and chassis is with the repairman right now...The monitor I got on ebay is a complete monitor with matching tube and chassis...It just needs to be mounted in a cabinet and plugged in...I just wasn't sure about my wiring...The power wire connector in...

Wells G 19K7203 for Pacman upright Hey Buffet- The old monitor is being worked on by somebody right now so I'll have a spare...The only thing that I know about the old monitor is that it was labeled RCA and the guy who's working on it said that it was a Wells Gardner...I wasn't sure if I could...

Hi all- I recently bought an original Pac cabinet that needed alot of cosmetic and technical repair. The cabinet now looks awesome after repainting, T-molding, etc... I sent the motherboard out for repairs, now works perfect...The original Wells Gardner monitor works but has alot of burn, so I...

Hi all- I bought my upright Sega Star Wars Trilogy on Ebay, but the board set was bad...Now I tracked down a replacement board set and everything looks and plays perfect...The music sounds awesome, but I have no sound effects or voice...I did a memory test and all chips checked out ok, but when...

Does anybody have an intact control panel for the upright Star Wars Trilogy they would be willing to sell?

Here are some pics of the video my Star Wars Trilogy machine...Any thoughts on what it could be? Colors (darks) are missing and the graphics are screwed up...Do you think it's a problem with the motherboard, monitor or both?