Recent content by Brandonh1091

I've recently started having issues with my gas pedal assembly that I'm running on Jason's Pi Position setup in my old PP cab. I pulled the pedal assembly out to clean it up and reflow the pot since acceleration had been a little flaky. After reinstalling it, I got a low-voltage error when...

I currently have two K7000 monitors with arcing, cracked flybacks. I haven't been able to really work any down in my basement for the past few months because I was storing a couple of motorcycles for a neighbor while he was moving. He came and picked them up the other day, so I figured it'd be...

Okay, I'll go ahead and order some replacement pots just in case. Might as well replace them while I'm at it. Yep,I sure did! The B+ was one of the things I checked through the other night. I had came across a similar thread, and that ended up being the issue for them. I thought surely that was...

Thanks! I just ordered one. I honestly had no idea these existed, but that is awesome. I tried fiddling around with the pots some more no to avail. I have one of the remote boards installed, but it was cut off even before that. Hopefully the V/H position mod will do the trick.

Hey guys. Any ideas what would be causing the image on my G07 monitor to not be completely centered? Currently there's about a 2-3 inch gap at the bottom of the screen. I moved the vertical jumper to the bottom position, and it made a slight difference, but it's still a good bit off. Messing...

Will do, thanks for the quick reply!

Anyone have a source on a CRT neck socket that will work with a 19" G07? I need to buy a replacement, and I'm having a hell of a time finding one.

I've got a Robby Roto cabinet that was converted to a Skykid at some point in it's life. I was able to remove a lot of the black paint with alcohol and Magic Erasers, but the original artwork is faded pretty bad, and the left side ended up having a good bit of it missing completely. I'm fairly...

What's up guys, just having some issues with the remote board on my Nieman 3M27SF chassis. The screen was originally cut off at the top. The picture itself looks great, it just needs to be adjusted down a few inches. Turning the vertical pot (VR515) has no effect on the screen, so originally I...

My Gauntlet Legends cabinet has started making "popping" noises every so often when it's running, each time causing the screen to jump a little. I had a similar issue on a Wells Gardener last year, and it turned out to be an arcing flyback transformer. I'm assuming I'm having the same issue on...

I use Deoxit D5 to clean my MVS carts, and have had really good results so far. Normally I'll take the cartridge completely apart and use an eraser to clean the edge of the PCB really well, then hit it with the Deoxit. Usually works like a charm.

Just wondering if someone could point me towards a suitable replacement 5k pot for a Roadblasters pedal assembly? https://na.suzohapp.com/products/driving_controls/220-5373 Happ said these will work, but there's I closer fit coming out in March. Just curious what everyone else uses.

Sent a PM about Gauntlet Legends.

Edit: ....Aaaaaand I just realized I posted this in the wrong forum. :/ Picked up a semi-working Gauntlet Legends cab yesterday afternoon, and I have a few questions. The wiring that supplies power to the HDD is directly connected to it from the power supply, instead of through the Sound/IO...

I'll take them! PM sent.