Recent content by br549autosales

  1. Megatouch Force chassis, arcing around the neck?

    Well that may be good news, I have extra Megatouch monitor tubes, where would I look for a short? Any particular location?

  2. Megatouch Force chassis, arcing around the neck?

    Looks like a light blue color arc inside the neck area

  3. Megatouch Force chassis, arcing around the neck?

    I will check when I get home this afternoon. Thanks

  4. Megatouch Force chassis, arcing around the neck?

    I just got 2 working chassis from a member and I installed them last night into 2 different Force games. This morning I installed the mother board back into them and turned each one on and I am getting a spark/arcing right around the neck of the tube. I know I have everything hooked back up...

  5. K7500 chassis issue

    I don't know, but I replaced tube and chassis, will the PCB not work correctly with the 7401 that I have in the machine?

  6. K7500 chassis issue

    It should not be a yoke issue, this game had a Hantarax Polo monitor in it. I replaced tube and all. The tube is the same one that had the chassis in question with it.

  7. K7500 chassis issue

    I may actually have a K7401 chassis instead of a 7500, is a 7401 a standard resolution chassis?

  8. K7500 chassis issue

    On the first pic here, there is a transistor on a heat sink, should a small harness be plugged into it? I notices on some of the other non working WG K7500 chassis that I have that there is a small harness plugged into that transistor.

  9. K7500 chassis issue

    A few more with screen image issue

  10. K7500 chassis issue

    Here are some pics of the chassis:

  11. swap kortek chassis with?

    Well I'm not in front of the machine right now but I do have the chassis I pulled out of it. It is a KTN-2001, it is a 12 pin neckboard, a ribbon cable with the small remote adjustment board and looks practically brand new, what is normally the issue with these chassis, could it possibly need re...

  12. swap kortek chassis with?

    I have a Ms Pacman that has a Kortek chassis in it which is dead, what other chassis can I use in it's place that will match up with the tube?

  13. Good price for Ms. Pac-Man cabaret?

    250.00-350.00 max

  14. Gorgar, no under play field illumination?

    Thank you Ken got the info, it was a bad bridge rectifier, the one on the right. I replaced the one on the left too since they were only 5.00 each Much appreciated, David

  15. Silverstrike 2007 Bowling, can it be updated?

    Now that's some helpful information, thanks.
See more
Back
Top Bottom