Recent content by BlackGTS

Update: Put in a new solenoid driver board and a new solenoid for the middle bumper and IT STILL DOESN'T WORK! Gotta be the wiring I would think. What now? Ron

Moving right along, I removed the MPU board, neutralized the alkaline from a previous battery vomit, cleaned pins, reinstalled the board, powered it up and..... we have joy on the start button. Well done guys. BUT, after installing the new coil, all coils fire except that one. Its the middle...

Yes I have credits and yes there is corrosion on the bottom of the board from a previous battery puke.

You guys hit it; blown fuse on playfield because of a locked up coil on one of the bumpers. Took coil out of the loop for now, replaced fuse and now I have all of the rest of the coils. I have also had an occasional problem with the start button. Tried cleaning contacts with no joy. Now I...

The knocker coil works too but that is it. I'll check all of the above and report back. Thanks Ron

Just picked up a nice SI that needs some work. Went through the diagnostics and only 2 of the 11 solenoids work! The flippers (tecnically 4) and the knocker. One of the bad ones really looks like toast but the rest don't. All appear to be original. Hard to believe that this game was played with...

Sold today

Price just dropped to $550

bumpbumpbump

For sale is a nice example of a mid 80's Bally pinball machine. Kings of Steel from 1984 has one of the best back glasses of the era and this back glass is immaculate. The overall condition of this pin is good. Cabinet is in nice condition with just a few scratches. Playfield is in OK condition...