Recent content by bigaw

Ran across these. The OutRunners . No monitors . looks like a lot of good parts.. the metal box that the boards are in the board 0n outside of box several prongs are damaged. no idea of condition of boards. Twin cab with seats prefer to sell as whole. cab and seats are fairly decent. looks to be...

board found new rottondog board

looking for a good 100% working I/o driver board please let me know what you have and price thanks

board sent pm if you decide to sell separate. would be interested in 520-5137-00 driver board

getaway panel received speaker panel today from arakisssun took a few weeks in shipping. but he cant help shipping time. and was as described.

Stern door Late model

Looking for late model stern pinball coin door with harness with 3 service button mainly need the door. Let me know if you want to sell door or harness thanks

speaker panel pm replied to money sent Thanks.

Looking for a nice speaker panel for a Getaway just need the plastic cover . But will take complete speaker panel . Please email me if you have one you want to sell. Got the new one from Germany not as good quality as original

I have 2 ARII Atari boards I tested these about a year ago and were working. I tested them in my pole position I have since sold so I have no way to retest them. one looks really good the other one has a little place on back.pointed at in pic. will take 20.00 plus shipping for both boards.

san fran or rush the rock force feedback board (NOS) this is a new old stock force feedback board for Atari san fran or rush the rock driving game. I have had for a while never installed. I sold my 2 games so not in need of this anymore. only opened to take pics. 210.00 shipped in US. if I...

board I am a newbe working on these. problem wasn't board. No Longer need one. at this time anyway. but thanks for help.

help Just wanted to give irepairsega a big thanks. the view buttons problems was wiring. finally traced it down. somewhere down the line the dash had been took apart and when it was put back together some of the wires going to the view buttons got pinched between the dash and metal part of...

help ok swapped the 67/68 ics still same thing so I switched the boards in metal box from one machine to other same problem in same machine. both of these board sets work fine in the machine on the right. at least I know its not them . going to swap some more boards and see if I can get the...

help thanks I will order them. and replace. thanks for help. anyway to check to see if they are bad or do you just have to replace them.