Recent content by BeagleBoy

I was just going to respond that it didn't make any difference, when I tried one more time, and suddenly got it to work. Moving them together adjusted vertical, while separating them adjusted horizontal. No idea how I was screwing it up before. ("Before" being after my first misguided...

A couple more questions about adjusting this monitor (actually a G05-801, presumably swapped in at some point). One, I tried to adjust the image center with the yoke rings, but both rings adjusted the Y axis. Am I missing something here? Two, I couldn't get the yoke to come free after...

Can you pull it out for a profile shot? That would probably answer it.

I was hoping that was the case. Thanks!

The image on my new Battlezone is off a few degrees ccw. I've never attempted to adjust the yoke on one of these. Anything I should know before I give it a go? Thanks! -Jim

Nice. ;) So in all seriousness, is windex safe for the silvered side?

I need to clean the mirror in my newly acquired Battlezone. Any recommendations?

Okay, the "image shrinking" bit was actually an illusion. The image is actually slightly rotated. Looks like a yoke adjustment is in order. Thanks, all, for the replies. -Jim

It is indeed a BL vs a BLB. Which is why I have to find one. The only local place I know of wants $20 for them.

Now I need to find a black light tube, and clean the dust off the mirror and the monitor.

This arrived in my basement last night. Needs a good cleaning, but I think it will fit in very well. :D

Reseated the interconnects, and it fired up. I think reflowing those headers, and replacing the interconnects is probably in order. Other than that, I've got a pretty loud hum in the audio (sound fully works, though). Guess it's time to do some AR2 thread reading. The final issue is the...

My (soon to be ex-) boss just gave me a Battlezone. Was working until this summer. When powered on, it makes the "tank noise" for a little while, makes a little skip, and repeats endlessly. Screen is blank. Test mode yields this: I haven't had time to dig into it, yet. I did take a few...

Odd. If I remember right, might actually bolts ( :eek: ) in place. I'll take a look when I get home. -Jim

6-month bump.... Seriously, does anyone know?