Recent content by AtariBorn

I know this is old news and the item has been sold, but does the adapter (from Paradise Arcade) generally come with the wires/harness for the kick buttons?

OK, I haven't been able to reproduce the problem again and the game is running great. Thanks for all the help

Well I found a "052x0131-001" to replace the "052x0131-001a" that blew and everything seemed to be working. One thing that bothers me...I shut it down for about 30 minutes and when I fired it back up to show a friend, the monitor seemed to flip out, tint and bright going crazy and a little...

Tested for continuity and got absolutely nothing with any combination of the four leads. Would this have kept the monitor from powering on at all?

Could a damaged 052x0131-001a Horiz Driver Transformer be my problem? I have a WG U2000 and couldn't get power to the monitor. I put in a new flyback and was in the process of recapping when I noticed a small transformer/coil with " 052x0131-001a" and the word "CORE" written on top and appears...

Looks like I've run into a problem with the same monitor. What is the most common problem with this model? Never had any problems with the cab and I've been running an Atomiswave in it since I got it from NERDtendo. I've been away from home for about six weeks and when I tried to fire it up, I...

8 bits in a byte. Turn the "bits" into "bytes" by dividing by 8. 4 Mbits / 8 equals 0.5 Mbytes or 512 Kb. So, yes. this is correct.

Anyone spotted one of these lately?

Never messed with these before, is Sanwa a direct replacement? They don't appear to mount like the joysticks in all of my woodys.

I did. My only concern was that the power supply that was in it looks like a 120 watt at Happ and all I had was 110 watt. All of my cabs are running the 110's except for a couple proprietary and I had never seen the 120 watt, so I was being precautious. But it works and I haven't had any...

I have a Tekken 4 showcase cab with a bad power supply. I have a few of the black 110 power supplies you find in a lot of cabs, like this... but this one has a silver finish and holes all in it, like a cage, like the image below... On Happ's website, these are different power supplies...

So I gather it's not JAMMA and from what I've read that Virtua Striker is a Sega Model 2 Game, so do I just need to find a Model 2 to JAMMA adapter?

I scored one of the massive machines and was wondering how much trouble it would be to get a Naomi or Namco 246 going in it. The cab has Virtua Striker in it, which is a Model 2 and I don't think its Jamma. Ofcourse neither are my Naomis or my 246, natively. I have Jamma adapters for both, but...

Would prefer just the Disc/Dongle, but would consider bundled with a 246/256 if reasonably priced.

I guess ill just replace the whole assembly then. Thanks