Recent content by Atari123

I've got a No Fear machine that's been giving me a little trouble lately. Occasionally the right popper will continue to go even after a ball's been put into play, or an event like multi-ball will be delayed, or it won't register that the ball had drained and will instead pop another one into...

well the ends that go into the machine's holes seem like the threads are worn down(shorter then the rest of the threads on the bolt) and I had put new bolts in their but I don't know what that means.

I had to take the legs off of my No Fear machine in order to switch out the leg levelers however on one leg it seems that the bolts won't go in all the way. They have gone into the holes and are in the machine but I can't get them to press all the way up on the leg to keep it stable. Does anyone...

okay well for now I wired the original plug to a new cord with wire nuts, but I'll try to get a complete cord later. I tried that Bob Roberts website except I'm more into using paypal so I'll see about that. I probably just try wiring in a PC outlet as that'll just be easier for the future.

okay I just attached the old plug to the new cord with wire nuts, then used electrical tape to keep them together. I'll probably get a complete cord later in the year

I would prefer a place that takes paypal, so for now I'll just use some wire nuts for it and if that doesn't work out I'll just have to keep on looking

Hi I'm trying to replace the power cord on my Ms. Pac-Man as the one on it now is missing the ground is starting to lost the insulation. However I hit the problem of that the current cord has a plug to hook into the machine and I'm trying to use a computer type power cord I had lying around for...

Okay so how is the power cable hooked into the power supply? I couldn't find any pictures and don't want to turn the entire machine around just to find that out.

Hi, I have a Ms. Pac-Man machine that has the ground lead cut off the power cable. I wanted to fix this but I have the question of should I replace the just the head or the existing cable? Or I have a spare computer power cable with all three leads, and could I just replace the entire cable instead?

It's a William's No Fear machine(Solid State), the leveler on the right is just a lot longer then the one one the left, both front and back.

I need to level my pinball machine(at the moment it's leaning to the left), however I have no way of taking off a leg and doing adjustments to it then. What is the best way to adjust the levelers on the machine?

Ok, so I have a Cashflow 330 coin mech in my No Fear machine, but I've so far only gotten it to work with Euros as I think this machine was in Germany or Spain at one time. Is there any way to get this to work with quarters, it does have a four dip switches.

Hi, I have a No Fear pin by Williams. I'm just asking a maintenance question here which is, the skull's mouth on mine will sometimes not open and close but the motor will still go(I still here it), however it does work sometimes but more often then not the skull stays closed. Is there any way to...

It's a Pac-Man cocktail they bought in an earlier episode, they spent 150 to buy it then another 350 to fix it up as it wouldn't start and the overlay was in bad shape. Though the guy that fixed it said that the problem was that someone tried to turn it into a Ms. Pacman but did it wrong. The...

well the filament in the fuse in the F901 slot looks likes it blown but I don't have a multimeter but I can borrow one Monday. the other three on the board have thick filaments but this one has two smaller filaments that don't seem to connect