Recent content by ArcadeCited

  1. ArcadeCited

    FS Game: The Fast and the Furious Drift Conversion (FS/FT) Dickinson, Texas

    Selling a Fast and the Furious Tokyo Drift Sit-Down Arcade Racer. Machine works good, has been power cycled many times and works good. - Number Pad works good - Game is set to Free Play, no quarters needed but option is available. - Shifter has some problems but can play automatic - Has brand...
  2. ArcadeCited

    WTB: Cruis'n World Sit-Down with seat, crt monitor

    I really thought this game was more popular...
  3. ArcadeCited

    -

    -Deleted-
  4. ArcadeCited

    WTB F&F Drift conversion kit

    Hi, I have a throw away sit down arcade cabinet that I would like to convert to a Tokyo Drift, does anybody have the boards and computer needed to run the game in a converted cabinet? DM me if you have what I need and are willing to sell. Thanks
  5. ArcadeCited

    Raw Thrills Terminator Salvation "connect I/O board" error

    I see... ok then, hopefully the new PC works
  6. ArcadeCited

    Raw Thrills Terminator Salvation "connect I/O board" error

    Brand new, so did this problem start with the old board? Because if so, than it's possible you may have to reinstall the software, if you have reinstalled the software, try again because it may have not installed the i/o functions correctly, contact raw thrills about your issue as well, they may...
  7. ArcadeCited

    Raw Thrills Terminator Salvation "connect I/O board" error

    This may sound stupid, but have you tried any of these methods? -Cleaning the Jamma pins on the board -Looked for possible unplugged plugs -reseating the Jamma harness -reseating the connectors that go from the board to the pc. -cleaning the connectors with a cleaning solution (Isopropyl...
  8. ArcadeCited

    Raw Thrills Terminator Salvation "connect I/O board" error

    I meant on the PC, sometimes the PC will have 2 serial ports
  9. ArcadeCited

    Raw Thrills Terminator Salvation "connect I/O board" error

    Oh, ok, can you show a picture of the board? Just to see where it's connected to on the PC, sometimes if it's plugged into a second serial port, it won't detect it.
  10. ArcadeCited

    Raw Thrills Terminator Salvation "connect I/O board" error

    I've had this problem with a Drift cabinet once, have you tried cleaning the usb connector? Better yet, try replacing the USB cord, sometimes if that goes bad, it will not detect the i/o board.
  11. ArcadeCited

    Anybody know what type of screw this is? And what I need?

    Trying to remove these screws from an arcade machine, none of my bits worked, it's an unusual type of screw, if it even is one, any idea what type of bit it needs?
Back
Top Bottom