Recent content by ACDNate

  1. Hollywood Crane

    Did a little cleanup and re-attached a resistor. After some testing it appears the transformer secondary 110v is bad. Gonna be interesting finding a replacement
  2. Hollywood Crane

    Finally circling back around to a crane I picked up a couple years back for $100. The gantry returns to home as it should. The claw coil won't energize consistently and now it won't start a game. Pulled the relay board to investigate closer. Found a couple obvious issues here and there but the...
  3. SOLD - PARTS 2 pcb board holders for soldering repairs

    Who makes these? That looks incredibly useful
  4. Rowe CD100 amp replacement

    Im going to make an attempt to repair this amp. Any input or ideas on the symptom? Video with audio below. Amp Fault As soon as the amp is plugged in, it starts to make this terrible noise. Different amp in the same machine works fine. This amp worked fine until a storm that lead to a power...
  5. Trackball Expansion Board for Arcade Jamma Switchers - 1 input / 6 outputs

    🤔 So this and a jamma switcher, as well as an HDMI switcher or using separate inputs on screen, could be a viable option instead of a $500 Perfect Solutions Switcher?
  6. Rowe CD100 amp replacement

    I'm definitely going to dive into the schematics a bit more when time allows. I am far more knowledgeable with pinball machines than these monsters. I did pull apart the amp and do a visual inspection and some preliminary basic testing. Nothing jumping out. No burnt resistors, swollen/burst...
  7. Rowe CD100 amp replacement

    Yes. Have multiple cd100 units. Symptoms follow the bad amp
  8. Rowe CD100 amp replacement

    I wasn't clear, I don't have an issue on the mute circuit. I don't have a clue what it is/does. That question related to the idea of replacing the rowe amp with something else and how that would be affected. Unfortunately repair requires shipping the unit out to someone who works on rowe amps...
  9. Rowe CD100 amp replacement

    Random thoughts. Has anyone ventured to replace the cd100 amp with something different? Amp rebuilds are fairly pricey these days(~$350), significantly more than modern amps. What is haven't sorted yet is the mute circuit on the amp. I've skimmed the schematics briefly but haven't dove in deep...
  10. Trackball Expansion Board for Arcade Jamma Switchers - 1 input / 6 outputs

    Does this work with Suzo Happ 3" trackball? https://na.suzohapp.com/products/trackballs/56-0100-11HL
  11. My experience with the Unico Phoenix 26" LCD monitor

    $250 is a stretch with that much burn in
  12. WG D9200 help

    Seems from my searches the GT fore is only capable of the 512x384 unfortunately
  13. WG D9200 help

    Wait I see what your saying now. Now I just need to determine if the GT Fore can output at 640x480.
  14. WG D9200 help

    Are you saying 640x480 is only supported with a dba15 VGA cable input?
  15. My experience with the Unico Phoenix 26" LCD monitor

    I suspect region makes a big difference. I've seen CRTs sit on marketplace for well over a year at good prices and even free in my area
Back
Top Bottom